“JERLAC” High Temperature Coatings

( Stoving )

High Temperature Coatings – Corrosion Protection of High Heat Areas

The corrosion protection of high heat areas associated with high temperatures is the perennial problem to the Industry. Jerlace High Temperature Coatings protect. The steel structural against atmospheric corrosion and under insulation corrosion up to 10000 C. The coatings cab even be sprayed to hot surface till 1200 C.The excellent resistance to thermal shock as a result of rapid temperature cycling, extend life expectancy assets.

1) HEAT RESIST 600 EPSI. Coating is specially manufactured for coating of parts which come into contact of heat upto 600 deg. Celsius.

2) This coating increases the life of parts on which they are applied for protection.

3) The application procedure of HEAT RESIST 600 is very easy.

4) It can be applied by brush after mixing it well and thinned down to application viscosity if required.

5) Single coat of PRIMER is required in case the application is to be done for whether resistance requirement.

6) The previously applied coating should be removed from the surface by PAINT STRIPPER/ Sand blasting or mechanical cleaning.

7) The paint stripper should be applied to the surface and left for few minutes till the paint starts lifting from the surface.

8) Then the surface should be scraped lightly with the help of emery paper. The surface should then be cleaned by thinner followed by application of two coats of HEAT RESIST 600 . Minimum four hours time should be given between each coat.

9) The surface will air dry after four hours. It can be taken in use after overnight curing of final coat.

10) The coating will thorough dry in actual use and when temperature exceeds 200 deg C for minimum one hour.

11) The covering per litre is around 90 to 100 sq ft per coat. Depending upon the absorption by the surface.

Temperatures up to 550 degree Celsius
Item Weight : 299 g
Product Dimensions:8 x 21 x 24 cm

High Temperature Coatings – Corrosion Protection of High Heat Areas

The corrosion protection of high heat areas associated with high temperatures is the perennial problem to the Industry. Jerlace High Temperature Coatings protect. The steel structural against atmospheric corrosion and under insulation corrosion up to 10000 C. The coatings cab even be sprayed to hot surface till 1200 C.The excellent resistance to thermal shock as a result of rapid temperature cycling, extend life expectancy assets.A) Highlights

  • Paints are provided by us is capable of withstanding high temperatures.
  • Products are having wide range of heat resistance ranging from 400, 600, 1200 to 1800 degree Celsius
  • It is mainly used as heat resistant paint up to 600 degrees Celsius.
  • Ordinary paints do not withstand the temperature up to 600 degrees Celsius and hence application of All products are being used by major industries for ovens and furnaces heat resistant paints is required for such hot surfaces.
  • It is used as heat resistant coating suitable upto 600 degrees Celsius.
  • It is suggested mainly for continuous temperatures between 250 and 550 degrees Celsius.
  • In case of humid and salty weather special Primer for Heat resist 600 is used.
  • This is widely used in industries for chimney paintings and exhaust pipes painting.
  • This special coating is generally for exterior of furnaces to achieve proper heat despation of exterior surface thereby providing increase life furnace.
  • Then this coating is applied for protection of primer as well as aesthetic look to the surface.

Product Code

1100HEAT RESISTANT BLACK – 600°C
1101HEAT RESISTANT ALUMINIUM – 600°C
1102HEAT RESISTANT ALUMINIUM – 400°C
1103HEAT RESISTANT ALUMINIUM – 200°C /AD CUM STOVING
1104SILICONE PRIMER
1105HEAT RESISTANT GREY- 550°C